| Name |
Meaning |
Machine type |
| G00 |
Rapid positioning |
Mill / Lathe |
| G01 |
Linear interpolation |
Mill / Lathe |
| G02 |
Clockwise circular interpolation |
Mill / Lathe |
| G03 |
Counterclockwise ircular interpolation |
Mill / Lathe |
| G10 |
Set data (L2, L10, L12) |
Mill / Lathe |
| G12.1 |
Polar coordinate interpolation on |
Lathe |
| G13.1 |
Polar coordinate interpolation off |
Lathe |
| G15 |
Cancel polar programming |
Mill |
| G16 |
Polar programming |
Mill |
| G17 |
XY plane selection |
Mill / Lathe |
| G18 |
XZ plane selection |
Lathe |
| G20 |
Imperial mode |
Mill / Lathe |
| G21 |
Metric mode |
Mill / Lathe |
| G28 |
Return to home position |
Mill / Lathe |
| G30 |
Return to home position specified by the parameters |
Mill / Lathe |
| G32 |
Thread cutting |
Lathe |
| G33 |
Thread cutting |
Lathe |
| G43 |
Tool length (height) compensation |
Mill |
| G50 |
Cancel scaling coordinate |
Mill |
| G51 |
Scaling coordinate |
Mill |
| G52 |
Local (programmable) coordinate |
Mill |
| G53 |
Machine coordinate |
Mill / Lathe |
| G54 ... G59 |
Work coordinate |
Mill / Lathe |
| G65 |
Macro call |
Mill / Lathe |
| G66 |
Macro modal call |
Mill / Lathe |
| G66.1 |
Macro modal call |
Mill / Lathe |
| G68 |
Coordinate rotation |
Mill |
| G69 |
Cancel coordinate rotation |
Mill |
| G70 |
Finishing cycle |
Lathe |
| G71 |
Roughing cycle |
Lathe |
| G72 |
Facing cycle |
Lathe |
| G73 |
Fast peck drilling |
Mill |
| G73 |
Pattern repeating cycle |
Lathe |
| G74 |
Face grooving cycle (peck drilling) |
Lathe |
| G75 |
Grooving cycle |
Lathe |
| G76 |
Threading cycle |
Lathe |
| G78 |
Threading cycle |
Lathe |
| G80 |
Cancel canned cycle |
Mill |
| G81 |
Simple drilling canned cycle |
Mill |
| G82 |
Dwell drilling canned cycle |
Mill |
| G83 |
Peck drilling canned cycle |
Mill |
| G84 |
Tapping canned cycle |
Mill |
| G85 |
Boring canned cycle |
Mill |
| G87 |
Radial drilling |
Lathe |
| G88 |
Radial tapping |
Lathe |
| G90 |
Absolute programming |
Mill |
| G90 |
Straight and tapered cycle |
Lathe |
| G91 |
Incremental programming |
Mill |
| G92 |
Threading cycle |
Lathe |
| G94 |
Simple facing cycle |
Lathe |
| G96 |
Constant surface speed |
Lathe |
| G98 |
In the canned cycle, is it a return to initial "Z" value position |
Mill |
| G99 |
In the canned cycle, is it a return to "R" value position |
Mill |
| G112 |
Polar coordinate interpolation on |
Lathe |
| G113 |
Polar coordinate interpolation off |
Lathe |
